Análisis Elemental de las Propiedades Morfológicas, Físicas y Químicas de Dos Instrumentos Rotatorios Protaper Universal

RESUMEN: Los instrumentos rotatorios utilizados en el tratamiento de conductos dentales necesitan cumplir con ciertas características físicas que le confieran un uso correcto, adecuado y seguro para su uso clínico. En el mercado comercial existen una serie de instrumentos importados que dejan en duda la autenticidad de estos debido a sus bajos costos. En este estudio evaluamos física, química y morfológicamente dos kits de instrumentos rotatorios Protaper universal (Dentsply) mediante análisis de MEB, EDX, microdureza y EDS. Uno de los kits (grupo 1) se adquirió directamente de la casa comercial y otro kit importado que a simple vista no parecía cumplir con los estándares de calidad de un correcto empaquetado (grupo 2). En el análisis de MEB se observaron características morfológicas muy diferentes entre ambos kits, el grupo 2 presentó diversas irregularidades en la superficie de las limas, sin embargo, en el EDS no se encontró diferencia alguna. En cuanto al análisis de microdureza se observó una estadística estadísticamente significativa y en el EDS se observaron mayores picos de intensidad en cuanto a la aleación de Ni-Ti en el grupo 2. Estos resultados sugieren que existen instrumentos rotatorios importados que a pesar de su bajo costo pueden presentar ciertas características muy similares a los kits auténticos, sin embargo, física y químicamente pueden resultar en un riesgo para su uso clínico debido a la diferencia entre estos.

ABSTRACT: Rotatory files are instruments used in the treatment of dental canals roots. These instruments need to comply with certain physical characteristics for a correct, adequate and safe use for clinical use. In the commercial market there are a series of imported instruments that cast doubt on their authenticity due to their low costs. In this study we physically, chemically and morphologically evaluated two Protaper universal rotary instrument kits (Dentsply) using SEM, EDX, microhardness and EDS analysis. One of the kits (group 1) was purchased directly from the commercial house and another imported kit that a simple view did not seem to meet the quality standards of a correct packaging (group 2). In the SEM analysis, very different morphological characteristics were observed between both kits, group 2 presented various irregularities on the surface of the files, however, no difference was found in the EDS. Regarding the microhardness analysis, a statistically significant statistic was observed and in the EDS, higher intensity peaks were observed in terms of the Ni-Ti alloy in group 2. These results suggest that there are imported rotary instruments that despite their low cost can present characteristics very similar to authentic kits, however, physically and chemically they can result in a risk for their clinical use due to the difference between them.

Chemical and structural composition of black pigmented supragingival biofilm of bovines with periodontitis / Composição química e estrutural do biofilme supragengival pigmentado de bovinos com periodontite

Bovine periodontitis is a multifactorial disease primarily associated with a potentially pathogenic microbiota housed in the oral biofilm of animals. Biofilms are organized structures, in which the constituents coexist in symbiosis, already described as a predisposing factor to periodontitis in other species. The objective of the present study was to characterize the structure and chemical aspects of the bovine black pigmented supragingival biofilm using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), respectively, and determine its relationship with bovine periodontitis. Eleven premolar teeth from different animals were evaluated; five non-pigmented samples and six samples with black pigmented biofilms were initially submitted to SEM, and three areas of these samples were selected for EDS. The structure of the pigmented biofilm was more complex and irregular because of a higher content of mineral elements. The semi-quantitative EDS data indicated an association of iron (p<0.014) and magnesium (p<0.001) with the occurrence of periodontitis, whereas carbon, phosphorus, calcium, manganese, sodium, and potassium were not associated with the disease. Carbon (p<0.039), manganese (p<0.007), and iron (p<0.015) were associated with pigmentation, whereas phosphorus, calcium, and magnesium were not associated with it. Spearman correlation test showed the relationships between calcium and phosphorus, and iron and silicon. The strong association of iron in the pigmented supragingival biofilm and with the occurrence of periodontitis suggests the presence of microorganisms that use this element in their metabolism and that are also associated with bovine periodontitis. This study suggests that the pigmented deposits in the crown of the teeth of cattle are an true biofilm with the deposition of iron, and it indicates that the presence of iron and magnesium in these formations may be involved in the metabolism of some microorganisms associated with the etiology of bovine periodontitis.(AU)

A periodontite bovina é uma infecção multifatorial associada primariamente à microbiota potencialmente patogênica presente no biofilme bucal. Biofilmes são estruturas organizadas, nas quais os constituintes convivem em simbiose, descritos em outras espécies como um fator predisponente à periodontite. O objetivo do presente estudo foi caracterizar estrutural e quimicamente o biofilme supragengival pigmentado de preto em bovinos, utilizando-se as técnicas de microscopia eletrônica de varredura (MEV) e espectroscopia de dispersão de energia (EDS), respectivamente, correlacionando os elementos identificados à ocorrência de periodontite e pigmentação. Foram avaliados 11 dentes primeiro-molares; cinco amostras sem pigmentação visível e seis amostras com biofilme pigmentado de preto, que foram submetidas inicialmente à MEV; posteriormente foram selecionadas três áreas aleatórias de cada dente para realização da EDS. A estrutura do biofilme pigmentado revelou formações irregulares e mais complexas, provavelmente devido ao maior acúmulo de elementos minerais. Os resultados semi-quantitativos da EDS apontaram associações entre a presença de ferro (p<0,014) e magnésio (p<0,001) com a ocorrência de periodontite. Carbono, fósforo, cálcio, manganês, sódio e potássio não apresentaram associação com a periodontite. Em relação à pigmentação, carbono (p<0,039), manganês (p<0,007) e ferro (p<0,015) foram os elementos estatisticamente significantes, enquanto fósforo, cálcio e magnésio não apresentaram associação com a pigmentação. O teste de correlação de Spearman demonstrou associações entre os elementos cálcio e fósforo, e ferro e silício. A forte associação do ferro presente no biofilme supragengival com a ocorrência de periodontite, sugere a presença de micro-organismos que utilizam este elemento em seu metabolismo e que possivelmente tenham envolvimento com o desenvolvimento da periodontite bovina. Os resultados inéditos do presente trabalho sugerem que os depósitos pigmentados que se formam na coroa dos dentes de bovinos são um biofilme verdadeiro com deposição de ferro, e indicam que a presença de ferro e magnésio nestas formações pode estar envolvida no metabolismo de alguns dos principais micro-organismos associados à etiologia da periodontite bovina.(AU)

Comparison of removal torques between laser-etched and modified sandblasted acid-etched Ti implant surfaces in rabbit tibias

PURPOSE: The purpose of this study was to analyze the effects of two different implant surface treatments on initial bone connection by comparing the Removal Torque Values (RTQs) at 7 and 10 days after chemically modified, sandblasted, large-grit and acid-etched (modSLA), and Laser-etched (LE) Ti implant placements. MATERIALS AND METHODS: Twenty modSLA and 20 LE implants were installed on the left and right tibias of 20 adult rabbits. RTQs were measured after 7 and 10 days in 10 rabbits each. Scanning electron microscope (SEM) photographs of the two implants were observed by using Quanta FEG 650 from the FEI company (Hillsboro, OR, USA). Analyses of surface elements and components were conducted using energy dispersive spectroscopy (EDS, Horiba, Kyoto, Japan). RESULTS: The mean RTQs were 12.29 ± 0.830 and 12.19 ± 0.713 Ncm after 7 days (P=.928) and 16.47 ± 1.324 and 16.17 ± 1.165 Ncm after 10 days (P=.867) for LE and modSLA, respectively, indicating no significant inter-group differences. Pore sizes in the LE were 40 µm and consisted of numerous small pores, whereas pore sizes in the modSLA were 5 µm. In the EDS analysis, Ti, O, and C were the only three elements found in the LE surfaces. Na, Ca, Cl, and K were also observed in modSLA, in addition to Ti, O, and C. CONCLUSION: The implants showed no significant difference in biomechanical bond strength to bone in early-stage osseointegration. LE implant can be considered an excellent surface treatment method in addition to the modSLA implant and can be applied to the early loading of the prosthesis clinically.

Strontium Ranelate Effect on the Repair of Bone Defects and Molecular Components of the Cortical Bone of Rats

Abstract This study was conducted to evaluate the effects of treatment with strontium ranelate (SR) on the repair of bone defects and molecular components of bones in femurs. Adult female rats (n=27) were subjected to ovariectomy (OVX) or Sham surgery. Thirty days after surgery, a defect was made in the femur and the animals were then divided into three groups: OVX, SHAM and OVX+SR. Euthanasia was performed four weeks after the bone defect surgery. Repair in bone defect was assessed by computed microtomography (μCT) and chemical composition of cortical bone was analyzed by Fourier transform infrared (FTIR) spectroscopy and energy dispersive X-ray spectroscopy (EDS). The trabecular thickness (Tb.Th) of the newly formed bone in the OVX+SR group was significantly higher than that for the OVX group. The collagen maturity in the OVX+SR group was smaller than in the other two groups. In this group, a significant increase in the amount of strontium (Sr) and a decrease in the amount of calcium (Ca) embedded to bone tissue were also observed. Systemic treatment with SR improved microarchitecture of the newly formed bone inside the defect, but decreased cross-linking of mature collagen in cortical bone.

Resumo Este estudo foi conduzido para avaliar os efeitos do tratamento com ranelato de estrôncio (RE) na reparação de defeitos ósseos e componentes moleculares de ossos nos fêmures. Ratas adultas (n = 27) foram submetidas a ovariectomia (OVX) ou cirurgia Sham. Trinta dias após a cirurgia, um defeito foi feito no fêmur e os animais foram então divididos em três grupos: OVX, SHAM e OVX+RE. A eutanásia foi realizada quatro semanas após a cirurgia de preparo do defeito ósseo. A reparação do defeito ósseo foi avaliada por microtomografia computorizada (μCT) e a composição química do osso cortical foi analisada por espectroscopia de infravermelho de transformada de Fourier (FTIR) e espectroscopia por energia dispersiva de raios X (EDS). A espessura do osso trabecular (Tb.Th) recém formado no grupo OVX+SR foi significativamente maior que a do grupo OVX. A maturidade do colágeno no grupo OVX+SR foi menor do que nos outros dois grupos. Neste grupo, observou-se também um aumento significativo na quantidade de estrôncio (Sr) e uma diminuição na quantidade de cálcio (Ca) no tecido ósseo. O tratamento sistêmico com RE melhorou a microarquitetura do osso recém formado dentro do defeito, mas diminuiu a reticulação do colágeno maduro no osso cortical.

Influence of irrigants in association with ultrasound for cleaning root dentin surface after post space preparation: EDS analysis / Influencia de irrigantes en asociación con ultrasonido para la limpieza de la superficie de la dentina radicular después de la preparación del espacio para postes: análisis de espectroscopia de energía dispersiva

This study evaluated the cleanliness of post space after different irrigation protocols, associated or not to the use of ultrasound. Thirty-six single-rooted bovine roots were instrumented with rotary system, irrigated with 1 % hypochlorite and filled with Ah Plus sealer and gutta-percha cones. After seven days in stove at 37 °C, two-thirds of canal filling was removed by drilling and the post space preparation was irrigated with 2.5 % NaOCl (group NaOCl); 0.2 % chlorhexidine (group CLX); distilled water (group Water); 2.5 % NaOCl + ultrasound (group NaOCl-US); 0.2 % chlorhexidine + US (Group CLX-US); or water + US (Group Water-US). Roots were cleaved in mesiodistal direction, prepared for scanning electron microscope (SEM) to evaluate the smear layer and debris presence and for energy dispersive spectroscopy (EDS) analyses, to evaluate chemical components of dentin after treatment. The data were subjected to statistical analysis (two-way Anova and Tukey's test 5 %). EDS analysis showed the presence of chemical components of filling material in the samples from all groups. SEM images showed large amount of obliterated dentinal tubules. The use of ultrasound influenced the removal of some components of filling material (p<0.05), but not allowed for total cleaning. It was concluded that none of the irrigating solutions, associated or not to the use of ultrasound were able to completely clean the post space.

Este estudio evaluó la limpieza de la preparación para el espacio de los postes después de diferentes protocolos de irrigación, asociados o no al uso de ultrasonido. Treinta y seis raíces unirradiculares de bovinos fueron instrumentados con sistema rotatorio, irrigadas con un 1 % de hipoclorito y rellenadas con el sellador Ah Plus y conos de gutapercha. Después de siete días en horno a 37 °C, dos tercios de la obturación del canal se removió por perforación y la preparación del espacio para los postes fueron irrigadas con 2,5 % de NaOCl (grupo NaOCl); Clorhexidina 0,2 % (grupo CLX); agua destilada (grupo agua); 2,5 % NaOCl + ultrasonido (grupo NaOCl - US); 0,2 % de clorhexidina + US (Grupo CLX - US); y agua + US (grupo Agua - US). Las raíces se cortaron en dirección mesiodistal y se prepararon para el microscopio electrónico de barrido (MEB) con el fin de evaluar el barrillo dentinario y la presencia de restos; así como mediante el análisis de espectroscopía de energía dispersiva (EDS) para evaluar componentes químicos de la dentina después del tratamiento. Los datos fueron sometidos a análisis estadístico (pruebas ANOVA de dos factores y de Tukey al 5 %). El análisis EDS mostró la presencia de componentes químicos del material de relleno en las muestras de todos los grupos. Imágenes del MEB mostraron gran cantidad de túbulos dentinarios obliterados. El uso de la ultrasonido influyó en la eliminación de algunos de los componentes de material de relleno (p <0,05), pero no permitió la limpieza total. Se concluyó que ninguna de las soluciones de irrigación, asociadas o no a la utilización de los ultrasonidos fueron capaces de limpiar completamente el espacio para los postes.

Comparison of removal torques between laser-treated and SLA-treated implant surfaces in rabbit tibiae

PURPOSE: The purpose of this study was to compare removal torques and surface topography between laser treated and sandblasted, large-grit, acid-etched (SLA) treated implants. MATERIALS AND METHODS: Laser-treated implants (experimental group) and SLA-treated implants (control group) 8 mm in length and 3.4 mm in diameter were inserted into both sides of the tibiae of 12 rabbits. Surface analysis was accomplished using a field emission scanning electron microscope (FE-SEM; Hitachi S-4800; Japan) under x25, x150 and x1,000 magnification. Surface components were analyzed using energy dispersive spectroscopy (EDS). Rabbits were sacrificed after a 6-week healing period. The removal torque was measured using the MGT-12 digital torque meter (Mark-10 Co., Copiague, NY, USA). RESULTS: In the experimental group, the surface analysis showed uniform porous structures under x25, x150 and x1,000 magnification. Pore sizes in the experimental group were 20-40 mm and consisted of numerous small pores, whereas pore sizes in the control group were 0.5-2.0 mm. EDS analysis showed no significant difference between the two groups. The mean removal torque in the laser-treated and the SLA-treated implant groups were 79.4 Ncm (SD = 20.4; range 34.6-104.3 Ncm) and 52.7 Ncm (SD = 17.2; range 18.7-73.8 Ncm), respectively. The removal torque in the laser-treated surface implant group was significantly higher than that in the control group (P=.004). CONCLUSION: In this study, removal torque values were significantly higher for laser-treated surface implants than for SLA-treated surface implants.

Effect of plasma welding parameters on the flexural strength of ti-6al-4v alloy

The aim of this study was to assess the effect of different plasma arc welding parameters on the flexural strength of titanium alloy beams (Ti-6Al-4V). Forty Ti-6Al-4V and 10 NiCr alloy beam specimens (40 mm long and 3.18 mm diameter) were prepared and divided into 5 groups (n=10). The titanium alloy beams for the control group were not sectioned or subjected to welding. Groups PL10, PL12, and PL14 contained titanium beams sectioned and welded at current 3 A for 10, 12 or 14 ms, respectively. Group NCB consisted of NiCr alloy beams welded using conventional torch brazing. After, the beams were subjected to a three-point bending test and the values obtained were analyzed to assess the flexural strength (MPa). Statistical analysis was carried out by one-way ANOVA and Tukey's HSD test at 0.05 confidence level. Significant difference was verified among the evaluated groups (p<0.001), with higher flexural strength for the control group (p<0.05). No significant differences was observed among the plasma welded groups (p>0.05). The NCB group showed the lowest flexural strength, although it was statistically similar to the PL 14 group (p>0.05). The weld depth penetration was not significantly different among the plasma welded groups (p=0.05). Three representative specimens were randomly selected to be evaluated under scanning electron microcopy. The composition of the welded regions was analyzed by energy dispersive X-ray spectroscopy. This study provides an initial set of parameters supporting the use of plasma welding during fabrication of titanium alloy dental frameworks.

O objetivo deste estudo foi avaliar o efeito de diferentes parâmetros de solda a plasma verificando a resistência flexural de barras de liga de titânio (Ti-6Al-4V). Quarenta espécimes de Ti-6AL-4V e dez espécimes de liga de NiCr foram preparados (40 mm de altura e 3,18 mm de diâmetro) e divididos em 5 grupos (n=10). As barras de liga titânio do grupo controle não foram seccionadas e nem submetidas a processo de soldagem. Os grupos PL10, PL12 e PL14, continham barras de titânio seccionadas e soldadas com uma corrente de 3 A por períodos de 10,12 e 14 ms, respectivamente. O grupo NCB consistiu de barras de liga de NiCr soldadas pelo método de brasagem convencional. Em seguida as barras foram submetidas ao teste de flexão de três pontos e os valores obtidos foram transformados em resistência flexural (MPa). Análise estatística foi realizada usando ANOVA de fator único e o teste Tukey com o nível de significância de 0,05. Diferença estatística foi verificada entre os grupos avaliados (p<0,001), com os maiores valores pra o grupo controle. Não foram encontradas diferenças entre os grupos de solda plasma (p>0,05). O grupo NCB apresentou os menores valores de resistência flexural embora tenha sido estatisticamente semelhante ao grupo PL14. Não houve diferença significante na profundidade de penetração entre os grupos de solda plasma (p=0,05). Três espécimes representativos foram aleatoriamente selecionados para serem avaliados por meio de microscopia eletrônica de varredura. A composição das regiões soldadas foi verificada por meio de espectroscopia por energia dispersiva. Este estudo fornece informações iniciais de parâmetros para permitir a utilização de soldagem plasma durante a fabricação de estruturas em liga de titânio.

Formation and characteristics of crystals on the surface of mineral trioxide aggregate in vitro / 实用口腔医学杂志

Objective:To examine the surface of mineral trioxide aggr eg ate (MTA) when treated in different conditions in vitro. Method: Root blocks were prepared. MTA and other three dental materials (Dycal, Dyr act and amalgam) were respectively filled into the root canals of prepared root blocks. The roots with the materials were maintained in distilled water or simul ated body fluid (SBF) at 37 ℃ for 5 days. Scanning electron microscopy(SEM) and X-ray energy dispersive spectroscopy(EDS) were employed to investigate the mor phological changes and chemical components. Results:There was pr ecipitate of simple crystal units or crystalline structure in the MTA specimens. EDS showed one or two peaks corresponding to calcium or calcium and phosphorus. Conclusions:Apatite may produce and grew by MTA on its surface.